澳洲10开奖结果查询

澳洲10网上投注

澳洲10人工计划网

澳洲10现场开奖结果

  • Aerospace
  • Automotive
  • Building & Construction
  • Chemical 
  • Solar
  • And More!

澳洲10开奖号码

Griff Paper and Film is a global supplier of custom engineered films, we can offer superior properties to meet and exceed your requirements in performance and cost effectiveness. Complete testing laboratory and the latest technology in converting such as lamination, slitting and coatings help shorten time lines from concept to completion.

澳洲10最新开奖号码

Acrylonitrile Butadiene Styrene (ABS)

Acrylonitrile-butadiene-styrene (ABS) is a flame retardant V0 extrusion material for applications in blow molding and sheet extrusion for vacuum forming.

澳洲10计划软件

Acrylonitrile Butadiene Styrene / Polycarbonate (ABS/PC)

Acrylonitrile-butadiene-styrene / Polycarbonate (ABS/PC) is a general purpose extrusion film with good toughness and strength, used for sheet and profile extrusions.

 

澳洲10计划软件

Acrylonitrile Styrene Acrylate (ASA)

Acrylonitrile-styrene-acrylate (ASA) is a medium impact low gloss resin with good resistance to weather aging. ASA has good melt strength for extrusion and thermoforming.

澳洲10计划软件

Ethylene Chloro Trifluoroethylene (ECTFE)

ECTFE is a strong, hard, tough, abrasion resistant film that retains its useful properties over a broad range of temperatures. ECTFE films have outstanding low temperature properties and have demonstrated excellent weathering properties in relation to UV radiation and common industrial or environmental pollutants. ECTFE films also exhibit high bulk and surface resistivity, high dielectric strength, low dielectric constant, and moderate dissipation factor. The dissipation factor varies slightly with frequencies > 1kHz.

澳洲10计划软件

Ethylene Trifluoroethylene (ETFE)

Ethylene-tri-fluoro-ethylene (ETFE) is a high performance resin that can be processed at relatively high rates compared to fluorocarbon resins. ETFE is inert to most solvents and chemicals, hydrolytically stable and weather resistant. Recommended upper service temperature is 150°C (302°F). Useful properties are retained at cryogenic ranges. The level and stability of dielectric ranges are excellent and the flame rating is V-0 by the UL-94 method.

 

澳洲10计划软件

Polybutylene Terephthalate (PBT)

Poly-butylene-terephthalate (PBT) is an unreinforced injection moulding resin, with excellent flow properties, good hydrolitical stability and chemical resistance.

澳洲10计划软件

Polycarbonate/ Polyethylene Terephthalate (PC/PET)

Polycarbonate / Poly-ethylene-terephthalate (PC/PET) is an unfilled PC+PET blend, offering an excellent impact performance over a wide temperature range and very good flow characteristics combined with high heat resistance.

澳洲10计划软件

Polyether Etherketone (PEEK)

Poly-ether-ether-ketone (PEEK) is a high-performance amorphous or semi-crystalline thermoplastic film with unique properties. PEEK films have high temperature resistance, excellent chemical and fatigue resistance and very high thermal stability. PEEK films exhibit superior mechanical and electrical properties at elevated temperatures in critical environments. PEEK film carries a VTM-0 class flammability rating (27μ) and exhibits a very low smoke and toxic gas emission when exposed to flame.

 

澳洲10计划软件

Polyetherimide (PEI)

Poly-ether-imide (PEI) is suitable for applications at high temperature. This amorphous polymer shows a combination of outstanding thermal, mechanical, and electrical properties, together with very low flammability. (PEI) resists a wide range of chemicals, has good resistance to UV and gamma radiation, and its high glass transition temperature allows the use at high temperatures while keeping the high mechanical properties.

 

澳洲10计划软件

Polyether Sulfone (PES)

Poly-ether-sulfone (PES) is an amorphous thermoplastic material that combines excellent thermal stability, high strength and toughness, excellent hydrolytic stability, transparency, and good resistance to environmental stress cracking. PES shows good chemical resistance along with a high heat deflection temperature of 399°F (204°C). The coefficient of linear expansion remains constant at temperatures of up to nearly 200°C, making films suitable for applications where high heat/low shrink specs are needed.

 

澳洲10计划软件

Polyimide (PI)

Polyimide (PI) is a film for use as a dielectric substrate for flexible printed circuits and high density interconnections. PI is the preferred dielectric film for very fine patch circuitry due to its superior dimensional stability, lay-flat, high modulus, and a coefficient of thermal expansion matched to copper. Polyimide also has very low moisture absorption and is laser abatable.

 

澳洲10计划软件

Polymethyl Pentene (PMP)

Poly-methyl-pentene (PMP) is a strong, tough film that is dimensionally stable over a broad range of temperatures. It has high wear resistance and outstanding flexural and tensile properties.

 

澳洲10计划软件

Polyphenylene Ether/ Polyamide (PPE/PA)

Poly-phenylene-ether/ Poly-amide (PPE/PA) exhibits an excellent balance of non- halogenated flame retardance, dimensional stability, high heat resistance, strength, and flow.

 

澳洲10计划软件

 

Polyphenylene Ether (PPE/PS) Modified

Poly-phenylene-ether (PPE/PS) displays good qualities of chemical resistance and low water absorption.

 

澳洲10计划软件

Polyphylene Sulfide (PPS)

Poly-phylene-sulfide (PPS) possesses qualities of good chemical resistance, Low water absorption, and good wear properties.

 

澳洲10计划软件

Polyphenyl Sulfone (PPSU)

Poly-phenyl-sulfone (PPSU) is an amorphous thermoplastic material that offers exceptional hydrolytic stability, and toughness superior to other commercially-available high-temperature engineering films. The polymer is inherently flame retardant, and also has excellent thermal stability, Making films suitable for applications where very low shrink at high temperatures are needed.

 

澳洲10计划软件

Polysulfone (PSU)

Poly-sulfones (PSU) are tough, rigid, high-strength thermoplastics that are suitable for continuous use up to 300 °F (149 °C). The resins are resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Polysulfones are highly resistant to mineral acids, alkali, and salt solutions. PSU is also highly resistance to degradation by gamma or electron beam radiation.

 

澳洲10计划软件

Polyvinylidene Flouride (PVDF)

Poly-vinylidene-flouride (PVDF) is chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, alcohols, etc. PVDF also has a very high purity, abrasion resistance, and a relatively low Coefficient of Friction. PVDF demonstrates excellent weathering properties and are also extremely resistant to UV radiation and common industrial or environmental pollutants.

 

Click here to download our product sheet.

 

澳洲10计划软件

Tetrafluoroethylene Hexafluoropropylene Vinylidenefluoride (THV)

Tetra-fluoro-ethylene / hexa-fluoro-propylene /vinylidene fluoride (THV) is noted for clarity and displays excellent resistance to chemicals as well as UV.

 

澳洲10计划软件

Thermoplastic Polyester Ether (TPE)

Thermoplastic polyester ether ( TPE) is both flexible and tear resistant in cold temperatures, TPE also displays a very low modulus grade and can be processed by many thermoplastic processing techniques like injection molding and extrusion.

 

澳洲10计划软件

澳洲10历史开奖号码

澳洲10官方开奖

Scroll to Top 快乐飞艇遗漏 秒速飞艇计划 澳洲8现场开奖结果 极速赛车开奖助手 秒速赛车开奖号码 澳洲幸运5规则 极速赛车走势软件 澳洲10软件下载